* [wip] port to stereoscope
* revert wip stereoscope port
- the v1/v2 split behind `dev.use-stereoscope` is being replaced by an in-place port onto stereoscope
- reusable pieces (progress handlers, bubbletea setup) get pulled back from f14b994 as needed
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* add docker-free image fixture builder
- `internal/imagefixture` writes deterministic image tarballs from handwritten layer specs: legacy `docker save`, docker 25+ OCI `docker save` (uncompressed, gzip or zstd layers) and plain oci-archive
- named fixture set covering whiteouts (file, dir, opaque, missing target), links, history edge cases, mode/uid only changes and duplicated files, plus the checked in `.data` save tarballs
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* record export and CI parity goldens from the current parser
- `internal/imagefixture/testdata/golden/<fixture>.export.json` and `<fixture>.ci.json` capture what the pre-stereoscope code produces for every fixture, so the stereoscope port can be checked against them without the old code
- regenerate with `UPDATE_GOLDEN=true go test ./cmd/dive/cli/internal/command/...`
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* add stereoscope v0.3.4 and wire its bus and logger
- stereoscope publishes on dive's partybus and logs through dive's logger (nested under `from-lib=stereoscope`)
- `go` directive moves to 1.26.8 (stereoscope's minimum), CI bootstraps go 1.26.x to match
- `docker/cli` moves to v29.8.2 (via stereoscope), `docker/docker` to v28.5.2 so the existing resolver still builds against the newer `go-connections`
- `scylladb/go-set` stays on the pseudo version stereoscope pins (386 fix, never tagged); a `replace` back to v1.0.2 would break `go install ...@latest`
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* build linux releases with containers-storage support
- linux builds get `-tags containers_image_openpgp,exclude_graphdriver_btrfs` (same as syft), which compiles in stereoscope's containers-storage provider for podman/buildah stores
- still `CGO_ENABLED=0` and static; darwin/windows are unchanged since there's no local store there
- linux/amd64 binary grows about 7MB (21MB to 28MB)
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* add stereoscope based image analysis
- `dive.Analyze(ctx, ref, img)` derives layer info (diff ID, history command, size) and efficiency stats from a
stereoscope image, exposing the image itself on `Analysis`
- efficiency walks each layer's own tree and sizes whiteouts from the squashed tree of the layers below, no
restacking
- a whiteout of a path no lower layer has is skipped instead of cutting the layer's walk short
- inefficiencies come sorted largest first with ties ordered by path
- `imagefixture.Load` reads a fixture through stereoscope
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* cover stereoscope efficiency on fixture images
duplicates, removed files and dirs, opaque dirs, whiteouts of missing paths and hardlinks
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* add JSON export from the stereoscope analysis
`export.NewExportFromAnalysis` sits alongside `NewExport` with the same JSON shape:
- `layer[].id` and `layer[].digestId` are both the diff ID
- file lists walk each layer's own tree using the tar header as written, so hardlinks stay links
- implicit parent dirs (no tar header) are left out instead of showing up as empty entries
- `FileInfo` is now export's own type rather than `dive/filetree`'s
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* evaluate CI rules from a stats value
rules and the report read `ci.Stats` (efficiency, wasted bytes, user wasted percent, inefficient files) instead of
`*image.Analysis`, so both analyses can feed the evaluator. `ci.NewStats` reads the stereoscope analysis,
`ci.NewStatsFromImageAnalysis` the old one. Rules and report text are unchanged
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* check export and CI goldens against the stereoscope path
the golden tests now load every fixture through stereoscope and run `dive.Analyze`, `NewExportFromAnalysis` and
the CI evaluator. The old parser versions of these tests are gone (git history has their goldens).
every difference from the old goldens is intentional:
- all 17 `*.export.json`: `layer[].id` is now the diff ID (was the legacy layer dir hash, or `"blobs"` for OCI saves)
- `history-fewer-than-layers.export.json`, `no-history.export.json`: `digestId` is the diff ID even without a
history entry (was `""`)
- `implicit-parent-dirs.export.json`: implicit parent dirs no longer show up as empty `path: ""` entries
- `duplicate-files-across-layers.{export,ci}.json`, `test-docker-image.{export,ci}.json`,
`test-oci-docker-image.{export,ci}.json`: equal size inefficient files are ordered by path (was `sort.Sort` order)
- `whiteout-missing-target.{export,ci}.json`: a whiteout of a path no lower layer has no longer aborts the layer's
efficiency walk, so `/opt/a` counts as 250 wasted bytes, efficiency goes 0.99 -> 0.5 and both rule sets now fail
`lowestEfficiency` and `highestUserWastedPercent`
- `oci-archive-gzip`: layer order comes from the index now, but the fixture has one layer so only `id` changes
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* add stereoscope based image source loading
- `source.Load` resolves a reference to a stereoscope image, caller owns `img.Cleanup()`
- accepts dive's `docker://` style and stereoscope's `docker:` style schemes
- new sources: oci-archive, oci-dir, registry (`oci-registry`), containerd, containers-storage, auto
- docker client keeps dive's host resolution (`DOCKER_HOST`, `DOCKER_CONTEXT`, config context, ssh hosts)
- podman reads containers-storage first on linux, then the podman socket
- `source.Build` wraps `docker build` / `podman build` and returns a loadable reference
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* accept the new image sources and add --platform
- `--source` / `container-engine` accept every `source.Sources` value plus the `docker-tar` and `oci-registry` aliases
- new `--platform` / `platform` option
- `Analysis.Reference` keeps the image argument as given (scheme included) for `source.Load`
- the old resolver path keeps working off `Analysis.Source` and `Analysis.Image`
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* add bubbletea progress handlers copied from syft
- depend on `github.com/anchore/bubbly` v0.2.2 (brings in bubbletea v1.3.10)
- handlers for stereoscope's pull docker, pull containerd, fetch image and read image events, copied from syft v1.55.0 without the cataloger/SBOM parts
- per layer rows from the new `ReadLayer` event, nested under the read image row and dropped once each layer is indexed
- dive's `TaskStarted` events render as one task tree; tasks that reuse an ID (dive passes the image name for several tasks) still get their own row
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* add a bubbletea progress UI that hands off to the TUI
- `ui.New` picks the bubbletea progress UI on an interactive terminal and the existing line based UI otherwise (no TTY, piped stdin, `--quiet`, `-v`, `NO_TTY`, or `CI` set)
- on `ExploreAnalysis` the progress program quits and restores the terminal before the gocui TUI starts; both UIs share one handoff function
- reports and notifications are held until the progress UI exits, the report text on stdout matches the line based UI
- ctrl-c / esc while the progress UI owns the terminal publishes an interrupt exit event
- console log output (dive's and stereoscope's, which share a logger) is muted while a UI draws, file logging is left alone
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* add a UI-only file tree built from stereoscope trees
- ported the view parts of `dive/filetree` (nodes, view info, render, sort, diff marks) into `ui/v1/filetree`
- the bottom of a layer range is the layer's precomputed `SquashedTree`, each top layer's own tree is compared in turn, same marks as before
- compare trees are built on demand per range and cached, instead of eagerly for every range
- "modified" content checks hash lazily through the image file catalog, only for files present on both sides with equal metadata, cached per file reference
- file metadata comes from the original tar header so hardlinks, sizes and modes look the same as before
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* run the TUI and extract on the stereoscope analysis
- `ExploreAnalysis` now carries a `*dive.Analysis` and blocks the publisher until the TUI is done with it, so the caller can clean up the image afterwards (the payload type sits in the `event` package for now, `payload` importing `dive` is an import cycle until the old resolvers go)
- layer views derive the id, short id and "FROM <id>" from the layer diff ID; image details list inefficiencies in their new (largest first) order
- extract reads the selected layer's files under the selected path from the loaded image instead of re-saving it, and writes them relative to the cwd as before, refusing absolute or `..` tar names, paths through symlinks that leave the cwd, and existing symlinks at a file's own path. It now matches the selected path exactly instead of as a string prefix
- temporary bridge: the old command path loads the image again through `dive/source` for the TUI
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* run dive and dive build on the stereoscope path
- both commands now go options -> `source.Load` -> `dive.Analyze` -> `--json` export, `--ci` evaluation or the TUI, the temporary bridge and the old resolver/adapter calls are gone
- `dive build` runs `source.Build` and loads the built image by its ID; `auto` builds with docker. It keeps the line UI since the build subprocess writes to the terminal
- `dive` uses `ui.New` (bubbletea progress UI where the terminal allows it)
- same task rows as before (Loading, Analyzing, Exporting, Evaluating, Building), and a failed task now stops its spinner
- every `source.Load` temp dir hangs off one generator and `source.Cleanup()` runs after `app.Run()`, so an interrupt (which skips the command's own cleanup) no longer leaves the image copy behind
- the "this can take a while" notification is dropped
- `--json` truncates an existing file instead of writing over its start
- `options.Analysis` keeps only `Image` (the raw reference), `V1UI` is now `LineUI`
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* delete the old image parser and file tree
- `dive/filetree`, `dive/image` (docker and podman resolvers included), `dive.GetImageResolver` and `command/adapter` are gone, stereoscope is the only image model now
- `export.NewExportFromAnalysis` is now `export.NewExport`, `ci.NewStatsFromImageAnalysis` is gone
- the `ExploreAnalysis` payload moves back to `internal/bus/event/payload`
- `docker/docker` is no longer a dependency
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* move the TUI from ui/v1 to ui/tui
- package `v1` is now `tui`, the line UI lives in `ui/line_ui.go`, no behavior change
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* deprecate --ignore-errors
- path errors no longer block the TUI, so the flag gates nothing. It is still accepted (flag and `ignore-errors` config) and warns when set
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* make the CLI tests run without docker
- tests that need docker or podman skip with the reason when the engine (or dive's docker config) isn't reachable
- new docker-free tests run the real command against docker-archive and oci-archive fixtures for `--json` (checked against the export goldens) and `--ci` pass/fail
- the default CI config test now runs `--ci` on the archive instead of relying on a load failure
- snapshots no longer embed the repo path; layer `id` in the JSON snapshot is now the diff ID, and inefficient file ties are ordered by path
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* move to golangci-lint v2
- v1.64.8 is built with go1.24 and refuses the go 1.26 module, binny now pins v2.14.0
- `.golangci.yaml` migrated with `golangci-lint migrate` (same funlen limits, default linters)
- fixes the staticcheck findings v2 reports
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* document the new image sources
- sources table with the new values, both scheme forms, `auto` and `--platform`
- podman reads containers-storage on linux (build tag, on in linux release builds) and the socket elsewhere
- pulls go through the docker API, layer `id` in the JSON is the diff ID, `ignore-errors` is deprecated
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* address review feedback on the stereoscope port
- `dive/source` moves to `internal/source`, and `dive.WalkTree` / `dive.TarHeader` are replaced by an internal `layertree` walker, so the only public surface left is `dive.Analyze` (which now honors ctx)
- docker client is built from the context endpoint (context TLS and ssh kept), `DOCKER_TLS` / `DOCKER_TLS_VERIFY` honored for env hosts
- podman client is built in dive and refuses ssh destinations, since stereoscope's fallback skipped host key checks
- registry http fallback limited to `localhost` and loopback literals, User-Agent no longer carries the binary path
- ctx reaches the TUI, cleanup waits for in-flight loads, and a second ctrl-c during cleanup no longer kills dive
- notifications always print (quiet aside), are escaped, show above the progress frame, and are drained on teardown
- extract writes with `O_EXCL` inside an `os.Root` and reports problems after the TUI exits instead of ending it
- TUI marks opaque whiteouts and their ancestors, implicit dirs no longer render Modified, failed hash reads aren't cached
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* keep go.uber.org/atomic v1.11.0 from main
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* allow CC0-1.0 licensed dependencies
`github.com/therootcompany/xz` (pulled in through stereoscope) is CC0-1.0, a public domain dedication like the already allowed `Unlicense`.
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* escape untrusted text in the final command error
Load errors carry text a registry or daemon controls (response bodies, pull messages), and clio prints the command's error raw, so a registry could drive the terminal (e.g. OSC 52 to set the clipboard).
- root and `build` errors now go through the same escaping as notifications, wrapped so `errors.Is` / `errors.As` still work
- the shared filter also escapes Unicode format characters (bidi overrides, zero width), so a path can't display as something else
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* find the podman machine socket on macOS
Since the ssh fallback was dropped, `--source podman` (and `dive build` with podman) on macOS found nothing unless `CONTAINER_HOST` was set, because podman machine only records ssh destinations in its config.
When no other socket is found, dive now asks `podman machine inspect` for the default machine's API socket and uses it if it exists.
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* check the snapshot cleanup error in the CLI tests
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* point the acceptance tests at the renamed snapshot build dirs
Splitting the goreleaser builds into `linux-build` and `build` changed the snapshot output dirs (`linux-build_linux_amd64_v1`, `build_darwin_amd64_v1`, `build_windows_amd64_v1`), so the acceptance jobs couldn't find the binaries.
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
* read OCI archives through docker-archive too
main's parser accepted an OCI archive under `--source docker-archive`, stereoscope's docker-archive provider needs a `manifest.json`. `docker-archive` now falls back to the oci-archive provider, so existing invocations keep working.
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
---------
Signed-off-by: Alex Goodman <wagoodman@users.noreply.github.com>
58 lines
1.4 KiB
Go
58 lines
1.4 KiB
Go
package imagefixture
|
|
|
|
import (
|
|
"archive/tar"
|
|
"bytes"
|
|
"crypto/sha256"
|
|
"encoding/hex"
|
|
"encoding/json"
|
|
"io"
|
|
"testing"
|
|
|
|
"github.com/klauspost/compress/zstd"
|
|
"github.com/stretchr/testify/require"
|
|
)
|
|
|
|
func TestFixturesAreDeterministic(t *testing.T) {
|
|
for name, spec := range Fixtures() {
|
|
var a, b bytes.Buffer
|
|
require.NoError(t, spec.Write(&a), name)
|
|
require.NoError(t, spec.Write(&b), name)
|
|
require.Equal(t, a.Bytes(), b.Bytes(), name)
|
|
}
|
|
}
|
|
|
|
func TestOCISaveDiffIDs(t *testing.T) {
|
|
var buf bytes.Buffer
|
|
require.NoError(t, Fixtures()["oci-save-zstd"].Write(&buf))
|
|
files := map[string][]byte{}
|
|
tr := tar.NewReader(&buf)
|
|
for {
|
|
hdr, err := tr.Next()
|
|
if err == io.EOF {
|
|
break
|
|
}
|
|
require.NoError(t, err)
|
|
files[hdr.Name], _ = io.ReadAll(tr)
|
|
}
|
|
|
|
var manifest []dockerManifest
|
|
require.NoError(t, json.Unmarshal(files["manifest.json"], &manifest))
|
|
var cfg struct {
|
|
RootFS struct {
|
|
DiffIDs []string `json:"diff_ids"`
|
|
} `json:"rootfs"`
|
|
}
|
|
require.NoError(t, json.Unmarshal(files[manifest[0].Config], &cfg))
|
|
require.Len(t, cfg.RootFS.DiffIDs, len(manifest[0].Layers))
|
|
|
|
// diff ids are digests of the uncompressed layer tars
|
|
for i, p := range manifest[0].Layers {
|
|
dec, err := zstd.NewReader(bytes.NewReader(files[p]))
|
|
require.NoError(t, err)
|
|
raw, err := io.ReadAll(dec)
|
|
require.NoError(t, err)
|
|
sum := sha256.Sum256(raw)
|
|
require.Equal(t, cfg.RootFS.DiffIDs[i], "sha256:"+hex.EncodeToString(sum[:]))
|
|
}
|
|
}
|